Soc ninja title

Schematics

Schematics

Work in progress here, so be WARNED that the published PCBs are untested.

Raspberry Pi 2 Shield

I based my work on https://www.disk91.com/2015/technology/hardware/design-a-raspberry-pi-hat-shield/.

Download the Kicad project files.

Prototype 1 - DEPRECATED

Current Prototype 2 available from Gitweb or direct tgz snapshot here.

To print (or send it to print), just use the generated Gerber files in the Gerber directory; they are probably up-to-date.

Controller (ATMEGA328P-PU based)

WARNING: this prototype 1 version has the following problems (solved in prototype 2):

  • Up, Down, Ok buttons should connect to GND, not VCC.
  • Vias are too small.
  • Missing a connection from A5 to an speaker.
  • Reversed display PINs.
  • Missing a resistor between light and GND.

Many thanks to Jordi for helping and quickly making the routing for the prototype.

Tobor controller 3D PCB

Download the Kicad project files.

Prototype 1




If you found anything useful enough and you want to thank us for that, please consider donating to people who need it, like the NGO OXFAM. Thank you !


Comments

Comments are manually approved. Just be a bit patient :-)

There are currently no comments

New Comment

required

required (not published)

optional

Recent Tweets